INOXE / PROJECT SOLUTIONS

Back-painted glass walls

Glass, backing and trims. One detail, with clear decisions.

Explore the work
Scroll into the material↓

THE WORK SCOPE

Back-painted glass walls

Back-painted glass wall work brings together glass dimensions, MDF backing, aluminium trims and screen openings. The technical example below shows material thicknesses, trim faces and panel-layout rules for one specific wall construction.

What to share for a review

Wall drawings, dimensions, door positions, screen size if applicable, quantities and required timing.

Discuss a project ↗

01 / WHAT WE DO

Different materials.
The same care for detail.

Start with the building element. Then explore its material and construction.

02 / THE MATERIAL LANGUAGE

Choose what you see.
Understand what is behind it.

INOXE / MATERIAL STUDY

The material sets the starting point.

Back-painted glass, stainless steel, aluminium and galvanized internal profiles. Each has a role in the construction, with a specification reviewed for each project.

01Back-painted glass02Stainless steel03Aluminium trims04Galvanized internal profiles

Metal type, thickness and fixing come from the drawings. These are not universal specifications.

03 / A GLASS DETAIL

From the layers,
to one surface.

A technical example of a back-painted glass wall. These dimensions belong to this construction, not every project.

Back-painted glass6 mm
MDF backing12 mm
Aluminium U-trim2 mm
MDF trims18 mm
Panel width1200 mm
Glass / overall with trims1644 / 1724 mm

RAL 2008 trim, with 40 mm faces at top and bottom. Panels have zero design joint. Dimensions apply to this specific construction.

Centre the panel run on the wall.

04 / PROJECT SCOPE

Define the work.
Then the detail.

Glass wall work, decorative stainless door cladding, lift-door surrounds, shelf frames and pipe dividers. Each scope is defined by the project drawings, dimensions and approved finish.

05 / FROM IDEA TO HANDOVER

Clear steps.
Connected details.

01

Read the scope

Drawings, dimensions, quantities and scope boundaries.

02

Coordinate the detail

Shop drawings, materials, finishes and samples.

03

Prepare the pieces

Cutting, bending and finishing to the approved detail.

04

Review installation

Fixing, flatness, gloss and construction details.

Glass-work stages

The sequence varies by scope. The glass example covers takeoff, shop drawings, glass supply and back-painting, profile fabrication, ground/first-floor installation, second/third-floor installation and final inspection.

BEFORE WE START

A few useful details.

What should I send first?+

Drawings or dimensions and photos, the location, work scope and required timing.

What scope can we discuss?+

Back-painted glass walls, decorative stainless cladding, lift-door surrounds, metal shelf frames and pipe dividers, with the boundaries agreed from the drawings.

How do we choose a finish?+

Start with the design and specification. The approved physical sample defines colour and texture, not the screen appearance.

Do the dimensions apply to my project?+

They describe one specific glass-wall construction. Your wall dimensions, doors and screen openings need their own review.

START WITH YOUR SPACE

A detail worth
talking about.

For a commercial project: share drawings or a BOQ, finish scope, project location and required programme.

Opens your email application. No information is sent automatically.

Discuss a project↑

INOXE / SCOPE

Discuss a project